Jurop PN Series Vacuum Pump

Jurop Sliding vane vacuum pump air cooled.

Forced lubrication. Copper oil piping. Aluminium inlet/outlet conveyors.

Built-in vacuum - pressure changeover valve.

Direct drive-system with smooth and splined shaft available. Upon request series PN are supplied with hydraulic motor.

Sort by:

View

Showing 1 - 24 of 28 products
Showing 1 - 24 of 28 products

Ring with your Part requirements

4 Vanes required per Pump

Thickness (mm):7,5
Width (mm):59,5
Vanes per compressor:4
Length (mm):353,7

4 Vanes required per Pump

Thickness (mm):9
Width (mm):59,5
Vanes per compressor:4
Length (mm):443,6

5 Vanes required per Pump

4 Vanes required per Pump

Thickness (mm):9
Width (mm):63.0
Vanes per compressor:4
Length (mm):528

Jurop PN48-58-84-106 Gearbox Cover (Pos 10 ) 

This is the Gearbox Cover when you have the PN48-58-84-106 (M) with Gearbox 

It enables it to run at 540rpm input speed used on most Tractor PTOs and holds the two gears and the bearings to increase the rotational speed of the rotor 

Jurop PN48-58-84-106 Gearbox End Drive Plate (Pos 8 ) 

End Drive Plate Flange with Gearbox 

Gearbox Cover is extra

Jurop Genuine Original Spare Parts 

Jurop PN155 Drive Gear Z53 (Pos 36 ) 

Fits the Jurop PN155M 

48 tooth Drive Gear to enable 540rpm input speed. 

Pinion available separately 

Jurop Genuine Original Spare Parts 

Jurop PN48-58-84-106 Pinion Z19 (Pos 38 ) 

Fits the Jurop PN48M , PN58M, PN84M and PN106M 

19 tooth pinion to enable 540rpm input speed. 

Drive Gear available separately 

Jurop Genuine Original Spare Parts 

Jurop PN48-58-84-106 Drive Gear Z48 (Pos 36 ) 

Fits the Jurop PN48M , PN58M, PN84M and PN106M 

48 tooth Drive Gear to enable 540rpm input speed. 

Pinion available separately 

Jurop PN48M-58M-84M-106M Seals and Gasket Kit 

Vanes and Bearings Not Included 

Jurop PN130M & PN140M Seals and Gasket Kit 

Vanes and Bearings Not Included 

Ring with your Part requirements

Oil Pump Drive Pin to suit PN58 - PN - RV Vacuum Pump 

Oil Pump (CW) to suit PN58 - PN84 & PN106 Vacuum Pump 

Jurop PN84M slurry tanker compressor

Flow 9000 l / min
Rotation 540 rpm
1.5 bar pressure
PTO shaft 6 splines 1 "3/8

Jurop PN106M slurry tanker compressor fitted with Hydraulic Motor

Flow 11000 l / min
1.5 bar pressure
 

Jurop PN106M slurry tanker compressor

Flow 11000 l / min
Rotation 540 rpm
1.5 bar pressure
PTO shaft 6 splines 1 "3/8

Jurop Genuine Spare Part

Price per vane 

5 Required per Pump 

Synthetic woven fabric with phenolic resin

Heat-resistant up to max. 200°C

Manufacturer:Jurop
Pump type: LC580 / PN155
Width (mm):
Thickness (mm):
Length (mm):
Vanes per compressor:5
Heat-resistant up to max. 220°C